Stupid Bike Question

Im crap with bikes me

7 messages
WildWill    pirate
01/07/2011 at 07:48
Can i use a rear wheel that has Ultegra Cogs on a bike that has a Dura Ace set up??
01/07/2011 at 07:56
Yes all Shimano/Sram cassettes are interchangeable as long as they have the same number of gears and the range is within the tolerance if you have a short mech.
WildWill    pirate
01/07/2011 at 08:01
Its a long mech (cos its a triple) and they are both 10spd ... I want a larger rear spread for a very hilly sportif on the 16th
Cona    pirate
01/07/2011 at 08:43
Yes then Will, like Gumps mentioned just need to ensure that the cassette is the same speed. 10 in your case, this will ensure that all spacing etc are ok and no issues shifting through the gears. I quite often change wheels and have SRAM cassette on one and a Shimano on the other, both 10 speed so no issues.

Campag have different spacing so aren't compatible.

Mrs bought me the Zinn bike maintenance book a couple of xmas's ago which is basic but is a great reference point. Might be worth a look
Nicko. Hdau    pirate
01/07/2011 at 08:47

As your on a triple Will try a 11/27 or 12/27 then you shouldn't need to use the granny ring!

But you already know that

Edited: 01/07/2011 at 09:08
Nicko. Hdau    pirate
01/07/2011 at 08:47
Ohh Hi Gumps are you at Outlaw again this year?
WildWill    pirate
01/07/2011 at 11:32
I will still need the grany ring as when i say hilly i mean dam hilly - one climb is 1 in 3 (33%) and is a challenge to the best nevermind me

We'd love you to add a comment! Please login or take half a minute to register as a free member
7 messages
Previously bookmarked threads are now visible in "Followed Threads". You can also manage notifications on these threads from the "Forum Settings" section of your profile settings page to prevent being sent an email when a reply is made.
Forum Jump  

RW competitions

RW Forums